Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$4.99
Threaded bolt-on caliper style pads - 40mm pad length
$5.99
A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish
$9.49
Forged Alloy seat-clamp.
$9.99
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Proportionally smaller platform size is perfect for smaller-sized feet - Durable 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 9/16" / 1/2" axle options - 300g per pair - Dimensions: 93 x 87mm
$15.99
- 25.4mm bar clamp - 620mm width with 10 backsweep
$29.99
Lightweight and durable die-cast alloy construction - 2-bolt clamp for maximum adjustability - 15mm offset - 400mm length
$31.99 - $39.99
Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation. - 180mm quill length.
$29.99
- Durable CrMo construction with 4-pawl internal engagement system - Fits left-hand (LH) threaded hubs only (allows mounting drivetrain on left side of bike for grinding on the right side) - Maintain with petroleum based lubricant (no wax/Teflon)
$9.99
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
$21.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$39.99
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
$42.00 - $43.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$77.99
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
$299.99
Our Box Three tier delivers many of the same capabilities of its more famous siblings yet it's built upon a simpler platform. Cassettes are accessible at 11-46T or 11-50T and fashioned with steel spiders. The derailleur exploits our Limited Slip clutch technology without the Tri-pack features. Shift easily with a comparable mechanism, although you'll forgo the hinged clamp and die-cast structure. And lastly, string it all together with a Prime 9 chain but without extravagant coatings. If you're looking to bring your 2/3 by bike into the 21st century, then level up with this group!
$19.99
In the unlikely event that you might need to replace the guard from your Barrier sprocket here it is, built from super tough nylon, the replacement guard comes with 4 x bolts for securing it to your sprocket.
$35.99 - $77.99
- CNC machined 7075-T6 aluminum with modified shift gates and special profiles to allow flawless shifting with 9sp and 10sp drivetrains - Middle and outer chainrings have strategically-placed stainless steel pins to further enhance shifting - 5mm thick middle ring, 4mm thick outer ring - Anodized black with laser-etched graphics
$59.99
Our oval chainring features our highly sought-after tooth profile for the best 1x drivetrain performance. Combine this chainring with a modern-day clutch derailleur and never worry about dropping a chain again. - Oval shape allows for greater power, increased traction, and a smoother spin - Blackspire's oval shape has an ovality of 12-13% with a timing of 115 degrees after the top dead center - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems, 9-speed drivetrains require a 10-speed chain - 30 tooth features built-in tabs for a 49.5mm chain line and is threaded for ideal fitment - CNC'd in Canada from 7075 aluminum with laser-etched graphics
$64.99
Our RaceFace Cinch Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11 and 12-speed systems. 9-speed drivetrains require a 10-speed chain - Direct mount for Race Face Cinch Boost cranks, 3mm offset for a perfect 52mm chainline - Direct mount for Race Face Cinch cranks, 6mm offset for a perfect 49mm chainline - CNC'd in Canada from 7075 aluminum with laser-etched graphics
$64.99
- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum
$65.99
- Protect your expensive narrow wide chainring from impacts - Lightweight thermoplastic bonded to a lightweight alloy backplate - 32t model fits 26-32t round rings and 26-30t oval rings - 38t model fits 34-38t round rings and 32-36t oval rings - Compatible with 1X and 2X drivetrains - CNC'd in Canada from 6061 aluminum with laser-etched graphics
$74.99
Our Shimano M9100 Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought after Bi Directional narrow-wide tooth design provides excellent chain retention without a chain guide - Direct mount for Shimano M9100, M8100, and M7100 and perfect for 1x setups - Features a perfect 51mm to 55mm chainline, depending on axle length and spacer configuration - CNC'd in Canada from 7075 aluminum with laser-etched graphics
$4.99
- Saddle clamp for straight seatpost - Diameter: 22.2mm
$19.98
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip
$25.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager Pro Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$29.99
Cold-forged for strength, bead-blasted for grip These bar ends feature a no-slip gripping surface and offer more comfortable hand position options. Bar ends offer increased comfort, greater variability in hand positioning, and improved leverage for climbing. Bontrager Forged Bar Ends are cold-forged for strength and durability and bead-blasted for better grip and control on the trail. Product details - Cold-forged, welded alloy construction - Bead blasted finish provides grip and adds strength - Offset tube design for more usable handlebar area
$29.99
This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs. - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing
$29.99 - $39.99
Instantly add comfort to your existing saddle with a cushy Bontrager Gel Saddle Cover. Rubberized on the underside to help it stay firmly in place, Bontrager's Gel Saddle Cover installs in seconds, thanks to a drawstring and toggle closure retention system.
$34.99
Double Gel Cork tape pairs an extra layer of gel padding with classic, long-lasting cork for handlebars that feel comfortable and look timeless. It's easy to install, looks great, and feels even better. - Ideal stretch for quick and easy installation - Features twice the amount of gel for maximum comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing - Double Gel Cork Tape has a thickness of 3.0mm
$45.99
Features a wide range of adjustment to dial in your fit. Ensure a proper fit for the best ride experience. Product details - High-quality alloy adjustable stem is quill-style, for use with threaded forks - Seamless integration with Bontrager's Elite Blendr mount kit, sold separately - Features 64 degrees of angular adjustment - 50mm stack height adjustment allows for a wide-range of fit options - Quill stem length is 180mm
$51.99
The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim
Page 1 of 16 Next page