Brakes/Levers/Pads

Threaded bolt-on caliper style pads - 40mm pad length

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim

Hope Disc Brake adaptors are CNC-machined and ensure a perfect fit with all Hope Brake sets. - CNC machined in Barnoldswick, England - Includes mounting bolts

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

- All around rubber compound - Compound resists heat buil-up and brake fade - Excellent wet weather performance

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

- High quality, durable stainless steel machined braking surface ensures consistent stopping power and resists corrosion - Reinforced rotor design improves stability and resists warping - Compatible with all sintered, semi-metallic, and organic/resin disc brake pad compounds

The Desist brake kit includes a Restrain brake lever, linear brake cable, and Desist brakes with Koolstop pads. Kink Desist brakes are fully forged from 7075-T6 aluminum for ultimate stiffness. The unique cable pivots and straddle cable system create a smoother and more powerful pull. A low stack spring and cap design also provide extra clearance for drivetrains. This brake set also includes the legendary Kool-Stop brake pads for plenty of stopping power. The Kink Restrain brake lever is constructed from a fully forged aluminum lever, body, and bracket to maximize strength and stiffness. It features a low-profile, finger-friendly design as well as an ergonomically designed lever for added comfort. It's oversized hinge joints and pin increase strength and prevent cracks or breaks from over-tightening. The Restrain lever is also universal and can be used on the right or left side. The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming.

Kool-Stop's Campi 2000 insert pad was designed to fit Campagnolo systems made after the year 2000. Features: - Patented Plow Tip - Water Grooves - Dove Tail fit - Rim Friendly - Replacement pads for Campagnolo 10-speed groups Black: standard compound designed for dry condition riding Dual: combination of Salmon and Black compounds for more controlled, smoother stopping Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions.

The Continental is Kool-Stop's classic conventional design, for use on older bicycles or brake systems with clearance problems. Great for City Bikes and steel rims. Features: - Internal backbone - Nyloc retaining nut - Thicker pad Specifications: - Weight per pair: 41.6 grams - Overall length: 45.5mm - Pad contact width: 9.4mm

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

• High performance compounds recommended for all-conditions • Steel backing

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all-conditions - Steel backing

Magura olives (compression ferrule) bag/20 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers

Magura sleeve nut for mt brakes bag/10 - Small parts used to install hydraulic hose for Magura disc brakes.

The 1999 Sidepull Brake is a lightweight brake kit for BMX. - Includes brake, lever and cable - Reach is 66-90mm

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose

Shimano, BR-M965, M06, Metal disc brake pads, pair, A type, Y8CL98010

- R50T2 compound brake pads for BR-4600 - Also fits BR-4600, BR-3400 and BR-R450 - Adjustable toe-in and contact angle - 5 pairs

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

- New resin pads have 50% more durability! - Pair of G-Type disc brake pads without fins, for 1 caliper - Resin compound, for improved modulation & lower noise - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin - Disc Pad Material: Resin - Pad Shape: Shimano G-Type/F-Type/J-Type - Backplate: Steel - Pad Spring: Included - Cooling Fins: No - Model Compatibility: BR-M8000

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

- New resin pads have 50% more durability! - Pair of G-Type disc brake pads without fins, for 1 caliper - Resin compound, for improved modulation & lower noise - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin - Disc Pad Material: Resin - Pad Shape: Shimano G-Type/F-Type/J-Type - Backplate: Aluminum - Pad Spring: Included - Cooling Fins: No - Model Compatibility: BR-M8000

- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin or Metallic brake compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

- 107mm arch gives a better mud guard clearance - Updated rubber boots - Strong braking power with excellent braking control

- Shimano, SM-RT56 Rotor, 180mm or 160mm, ISO, for resin pads only - Stainless steel rotor

- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

- Pair of D-Type disc brake pads without fins, for 1 caliper - Available with Resin or Metallic brake compound - Fits most 4-piston Shimano brakes, including XTR BR-M9120, XT BR-M8120, XT-BR-M8020, SLX BR-M7120, Saint BR-M820 and BR-M810, Zee BR-M640 and non-series BR-MT520 and BR-MT420 calipers - Can be used as a lower cost alternative to H-Type or N-Type pads - Includes spring and pin

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

6-Bolt disc brake rotor - Easy to install anti-loosen plates help secure disc brake rotor bolts in place - Resin/Metal pad compatible - Size: 160, 180, 203, 220mm

Shimano's BR-R451 Road Brake Calipers feature a sleek, minimalist design while providing excellent stopping power when you need it. - Compatible with STI and brake levers that are Super SLR enabled (Dura Ace Di2 7970, Dura Ace 7900, Ultegra Di2 6770, Ultegra 6700, 105 5700, Tiagra 4600) - Light action and accurate brake power - Adjustable toe-in brake shoes - Use of these calipers with standard SLR enabled STI and brake levers results in a "mushy" brake response - Brake Lever Actuation: Short Pull Super SLR - Brake Mount Type: Mid Reach Caliper (47mm - 57mm) - Brake Position: Front - Defined Color: Black - Pad Type: Cartridge

Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring

- SLX / 105 level Center-Lock rotors - Ice-Tech construction uses stainless steel brake surfaces with an aluminum core - The higher heat dissipation of the aluminum helps to reduce the surface temperature - High stopping power and practically no signs of fading - Features an external serration lockring (BB-type tool), compatible with all axle types

- Pair of H-type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits Shimano 4-piston calipers Saint BR-M820 and BR-M810, Zee BR-M640 & XT BR-M8020 - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than D-type pads - Includes spring and split pin

- Pair of N-type disc brake pads with fins, for 1 caliper - Fits 4-piston SLX, XT and XTR calipers from 12-speed generation groups - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than D-type pads - Spring included

SLX SM-RT70 Center Lock rotors deliver powerful and consistent braking performance in all riding conditions. They feature a 3-layer structure (an aluminum core paired with two stainless steel outer layers) that reduces rotor surface temperatures approximately 100 degrees Celsius compared to all-steel rotors. - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm hubs (sold separately)

Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately

- Pair of H-type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits Shimano 4-piston calipers Saint BR-M820 and BR-M810, Zee BR-M640 & XT BR-M8020 - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than D-type pads - Includes spring and split pin

Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands. - The brake lever's versatile design matches numerous bike styles - Braking power is adjusted for entry-level riders - Pre-bled brakes for easy, quick, and clean installation

Shimano Deore XT SM-RT86 6-Bolt rotors feature a 3-layer construction with an aluminum core and two stainless steel outer layers. Reducing rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors, the result is better braking performance and reduced brake fade. - Aluminum spider - Includes rotor fixing bolts and locking washers

Shimano BR-R317 Mechanical Road Disc Brake Calipers - Compact design - Lower profile (vs. BR-R505) - Cable actuated - Single 74mm caliper - For use with Drop-Bar or Flat-Bar road levers - G01S Resin Pads - Rotor not included - Adaptor for 160mm rotor (F160P/S) included - Brake Caliper Type: Post Mount , IS - Brake Lever Actuation: Short Pull Super SLR - Rotor Included: No (SM-RT54 160mm recommended) - Pad Compound: Resin

SHIMANO 105 R7000 Series will empower more riders than ever before to embrace the sport of road cycling. It will become the supportive groupset that beginner riders choose to help them train for, and ride in more serious races. By combining trickle down technology with a greater accessibility, SHIMANO 105 will continue to motivate and inspire more riders than ever to go after greater challenges. - Sleek low-profile caliper design - Wider clearance with larger tire sizes - Smooth and light operation - Integrated braking performance - Comfortable rough road riding with larger tire sizes - Intuitive braking control - Maximum tire size: 28C

Shimano 105 BR-R7000 road caliper brakes offer a clear contact feeling with balanced rigidity, weight and stopping power. - Sleek low-profile caliper design - Wider clearance with larger tire sizes (28c Max) - Smooth and light operation - Integrated braking performance - Comfortable rough road riding with larger tire sizes - Intuitive braking control - Brake Lever Actuation: Short Pull - Pad Type: Cartridge

BL-M4100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-MT410 - Long-lasting performance and quick - Easy installation and adjustment - Superior modulation gives you the power you need - Quick piston retraction - Lightweight 2-piston disc brake caliper - Pre-assembled and bled brake lever and caliper, with SM-BH59-SS hose & mineral oil - Without rotor and adapter - One-way bleeding system

Shimano's flagship disc brake rotor. Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - The inner aluminum surface of the FREEZA fins is covered with heat-dissipating paint. Providing even more colling performance to reduce brake fade. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Weight: 114g

BL-M6100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-M6100 - Pre-assembled - One-way bleeding system - Superior modulation gives you the power you need at low weight - Quick piston retraction - Lightweight 2-piston disc brake caliper - ICE TECHNOLOGIES - Without rotor and adapter

BL-M4100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-MT420 - 90% braking power vs. BR-MT520 - 20% increase braking power vs. current 2-piston BR-MT400 - 150% better wear-resistance vs. current 2-piston BR-MT400 - Brake pad: resin, metal - Pre-assembled and bled brake lever and caliper, with SM-BH59-SS hose & mineral oil - Without rotor and adapter - One-way bleeding system

The Deore XT M8100 hydraulic disc brake is designed to provide high performance braking for a variety of MTB riding styles. Includes the brake lever and disc brake caliper. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8100 2-piston brake caliper is optimized for cross country riding styles - Includes finned metal pads and hose - Brake Caliper Type: Post Mount - Hydraulic Hose Length: 1000mm (Front) / 1700mm (Rear) - Hydraulic Fluid Type: Mineral Oil - Rotor Included: No - Pad Compound: Metallic