Parts

Lightweight and durable die-cast alloy construction - 2-bolt clamp for maximum adjustability - 15mm offset - 400mm length

Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation. - 180mm quill length.

- Durable CrMo construction with 4-pawl internal engagement system - Fits left-hand (LH) threaded hubs only (allows mounting drivetrain on left side of bike for grinding on the right side) - Maintain with petroleum based lubricant (no wax/Teflon)

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- CNC machined 7075-T6 aluminum with modified shift gates and special profiles to allow flawless shifting with 9sp and 10sp drivetrains - Middle and outer chainrings have strategically-placed stainless steel pins to further enhance shifting - 5mm thick middle ring, 4mm thick outer ring - Anodized black with laser-etched graphics

Cold-forged for strength, bead-blasted for grip These bar ends feature a no-slip gripping surface and offer more comfortable hand position options. Bar ends offer increased comfort, greater variability in hand positioning, and improved leverage for climbing. Bontrager Forged Bar Ends are cold-forged for strength and durability and bead-blasted for better grip and control on the trail. Product details - Cold-forged, welded alloy construction - Bead blasted finish provides grip and adds strength - Offset tube design for more usable handlebar area

This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs. - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing

Instantly add comfort to your existing saddle with a cushy Bontrager Gel Saddle Cover. Rubberized on the underside to help it stay firmly in place, Bontrager's Gel Saddle Cover installs in seconds, thanks to a drawstring and toggle closure retention system.

- Straight-gauge 6061-T6 alloy shaft construction - 2-bolt rocker-head with micro-adjustment - Suitable for road or mountain use

Double Gel Cork tape pairs an extra layer of gel padding with classic, long-lasting cork for handlebars that feel comfortable and look timeless. It's easy to install, looks great, and feels even better. - Ideal stretch for quick and easy installation - Features twice the amount of gel for maximum comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing - Double Gel Cork Tape has a thickness of 3.0mm

Features a wide range of adjustment to dial in your fit. Ensure a proper fit for the best ride experience. Product details - High-quality alloy adjustable stem is quill-style, for use with threaded forks - Seamless integration with Bontrager's Elite Blendr mount kit, sold separately - Features 64 degrees of angular adjustment - 50mm stack height adjustment allows for a wide-range of fit options - Quill stem length is 180mm

Brooks Microfiber Bar Tape is manufactured from a synthetic textile which has been treated with a polyurethane coating for maximum resistance against abrasion and moisture, providing excellent durability. Included are a pair of Brooks Rubber Bar End Plugs.

Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: IS52/40/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide • Material: N/A • Weight: 35.35g

Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 62.79g

Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: ZS56/40/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 35.35g

This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles

This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

Replacement stainless steel cartridge bearings for Cane Creek 110 headsets - 38mm, 41mm, and 42mm are sold in pairs - 52mm sold individually

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS42/30/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 72g

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s

A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability. - Chromoly axle - Dual DU bushing system - Full-length 6mm off-road pins for added grip

- HexAir Technology is a breakthrough in saddle comfort featuring patent pending hexagonal, air pockets and specially treated outer layer to provide a non-stick surface - Easily stretches over most racing and touring saddles - Silicone with a hexagonal air pocket grid design is fully waterproof and UV resistant - Available in two sizes for racing and touring saddles - -01: Racing saddles, 5.5" wide; -02: Comfort/Touring saddles, 6.6" wide

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt - Weight: 12g

Get a grip…or two! Grips are a key point of contact between you and your bike. - Electra lifestyle grips help to personalize your ride - Durable Kraton lock-on grips featuring ergonomic shape for comfort and support - Matching saddle available for some models - One long grip/one short grip designed for bikes with one twist shifter - Length: 90/130mm - Diameter: 22.2mm - Material: Kraton - Weight: 171g

Grab life by the handlebars. If you've got something good, hold onto it. Update or customize your Cruiser with a variety of custom steel handlebars. For style, comfort or both. - Chrome plate - 690 mm wide x 150 mm rise - 25.4 mm (1?) clamp diameter - Material: Alloy - Weight: 805g

Original equipment specifications. - 25.4mm clamping diameter - Sandblasted silver finish - 27 degree backsweep